Heat Treatment Industry News
Heat treatment equipment of high temperature mesh belt furnace
High temperature mesh belt furnace is a national standard energy-saving periodic operation type electric furnace, which is mainly used for heat treatment of all
more>Heat treatment equipment mesh belt furnace
The mesh belt furnace is a sintering furnace in which the parts are transported continuously by the mesh belt protected by muffle. It is mainly used for the sin
more>Surface treatment of well type heat treatment furnace mold
Heat treatment of prehardened steel plastic mold1. Pre-hard steel is supplied in the pre-hard state. Generally, heat treatment is not required, but sometimes it
more>Description of type of annealing furnace burning bedstead
1. Bring a bed stoveFirst oxidation zone along the flame; Then, if there is excess fuel, it develops into a reduction zone. In a annealing furnace, water vapor
more>Function and use of mesh belt furnace
Usage: adopt pure hydrogen, ammonia decomposition or ammonia combustion gas as protective gas, ZYGW series continuous high temperature heat treatment mesh furna
more>Structure of mesh belt furnace
Furnace body structure1. The overall dimension of the cellar is about 6.5m long, 1.2m wide and 1.6m high. There are feed system and discharge system respectivel
more>Operating procedures for vacuum brazing multi-purpose furnace
1. before opening the vacuum furnace, ensure that water, electricity and gas are in operation. When the voltage is 380V, there shall be no 10% deviation. The ai
more>Mesh belt heater
The heating tube is used as the heating element, the worm gear reducer is used as the transmission, the chain drive and frequency conversion are used for speed
more>Function and use of mesh belt furnace
The coating process of the production line of wire mesh furnace coating is excellent: the coating is uniform in thickness, with silver gray surface, smooth and
more>belt powder metallurgy sintering furnace
RST series net belt powder metallurgy sintering furnace is continuous operation sintering production line.It is mainly used for pressing iron base, copper base
more>