On 2018-08-08 14:48:54
Heat treatment equipment of high temperature mesh belt furnace
High temperature mesh belt furnace is a national standard energy-saving periodic operation type electric furnace, which is mainly used for heat treatment of alloy steel products, various kinds of metal parts such as normalizing, quenching, annealing, etc., or for high temperature sintering of cutting blades such as diamond. High temperature furnace has many advantages in the use process, but some high temperature furnaces have a certain impact on the work if they are used for a long time. At this time, it is also very important for the maintenance of high temperature furnace.
In the process of using the high temperature mesh belt furnace, except for the test, do not stay in the tube area of the high temperature furnace for a long time; when handling HF, please wear gloves to avoid burns; if you accidentally touch HF, please flush water immediately, add 2% water with calcium gluconate, and rub the injured place for 15 seconds; use the finished quartz glass with care to avoid cracking and cutting; wear a work mask to prevent inhalation from the furnace or disposal All kinds of gases emitted from the tank; in case of any fault, please inform the maintenance technician immediately; potassium cyanide (KCN) shall not be mixed with acids, because both of them can produce highly toxic gases; please save the amount of pure water; break the chip, filter paper, cotton stick, etc., and do not fall into the bottom drain hole of the washing tank to avoid water accumulation on the floor due to poor drainage; at the end of the work If no one continues to use it, please turn off the gas, keep the activity of nitrogen, connect the furnace tube to the normal temperature, and check whether there is any other power that should be turned off or not. If you find that the power has not been turned off, please turn off it.
The above is just some aspects that should be paid attention to in the daily use of high temperature furnace. If we want to use a lot of heat treatment equipment, such as high temperature box furnace, high temperature resistance furnace and so on, we will have such and such failures when we use them for a long time. Therefore, we should learn to repair and maintain these products in our daily work, which can greatly improve the service life and service life of high temperature furnace products.