Heat Treatment Industry News
A box furnace needs a lot of preparatory work before it is opened
Introduction: box-type electric furnace before the opening of a lot of preparatory work, in addition to ensure the normal operation of the furnace, the more imp
more>box-type atmosphere furnace when using matters needing attention
1. It is suggested that both the heating rate and cooling rate should be 10-20℃/min without affecting the service life of the electric furnace (the service lif
more>trolley annealing furnace of home appliance panels and automotive panels
Trolley annealing stoves are commonly used to produce high quality home appliances and automotive panelsTrolley type annealing furnace is usually used for the p
more>What is the contamination and corrosion of the mold shell baking furnace?
Contamination and corrosiveness of mold and shell roaster:1, the mold roaster basically has serious ash of all levels of heating surface, superheater slagging a
more>tubular furnaces have good thermal insulation properties for good refractories
Tubular furnace electric furnace is a standard energy saving type of cycle operating furnace, super energy saving structure, using advanced composite furnace li
more>bell furnace of alarm and interlock in the heating process
1) In the process of combustion, if the temperature of the heating hood is greater than the limit temperature (850 degrees), then the temperature controller wil
more>Purge control link behind bell furnace inner hood
Ready to startStarting conditions: Cooling control and atmosphere control completeStep 1: Start flushingNitrogen large-flow butterfly valve and nitrogen dischar
more>annealing temperature in bell furnace of control principle
After the heating bell is successfully ignited, the control program reads the control program table and automatically calculates the heating rate of this line,
more>bell furnace of infrared heating and drying technology
The purpose of heating and drying equipment is to meet the requirements of the heating program of work or medium, such as the heating of ingot, heat treatment o
more>bell furnace of test requirements for opening conditions
Bell furnace opening conditions testing:1) "hand/automatic" switch of the valve holder operating box; rotate the switch to the "automatic" state2) The "emergenc
more>