Environmental simulation test equipment box
Environmental simulation high and low temperature constant temperature and humidity test equipment box
Constant temperature and humidity test chamber specifications / SPEC: (can be customized according to user product size) | ||||||
model | KS-HW80L | KS-HW150L | KS-HW225L | KS-HW408L | KS-HW800L | KS-HW1000L |
Internal dimensions W×H×D(cm) | 40×50×40 | 50×60×50 | 60×75×60 | 80×85×60 | 100×100×80 | 100*100*100 |
External size W×H×D(cm) | 88×137×100 | 109×152×113 | 109×168×113 | 129×177×123 | 150×191×144 | 150*193*163 |
temperature range | -60℃~150℃ -40~150℃ -20~150℃ | |||||
Humidity range | 20%—98%R.H(10%-98%R.H/5%-98%R.H Special conditions)
| |||||
Temperature and humidity analysis accuracy distribution accuracy | ±0.1℃;±0.1%R.H./±2.0℃;±3.0%R.H. | |||||
Temperature and humidity control accuracy / volatility | ±0.3℃;±2.5%R.H./±0.5℃;±2.0%R.H | |||||
Heating/cooling time | About 4.0 ° C / min; about 1.0 ° C / min (5-10 ° C per minute is a special selection)
| |||||
Internal and external materials | SUS304#1.5mm Stainless steel plate matte finish, outer box with advanced cold plate nano-paint | |||||
Insulation material | High temperature resistant high density ethyl chloroformate foam insulation material | |||||
cooling system | Air-cooled / single-stage compressor (-20 ° C); wind, water-cooled / two-stage compressor (-40 ° C - 70 ° C) | |||||
protective device | No fuse switch, compressor overload protection switch, refrigerant high and low voltage protection switch | |||||
power supply | 1Φ220VAC±10%50/60Hz&3Φ,380V/415VAC±10%50/60Hz | |||||
