internal grinder before working of inspection items


Today I would like to introduce the inspection items of internal grinder before working. Is a professional production of internal, external and centerless grinder machine tool manufacturing enterprises.


internal grinder before working of inspection items


1. Carefully check the sanitation of each part of the machine tool, and clean the grinding dust on the worktable, corrector, shield, etc. Remove the grinding ash from the ash collection tank.


2. Check whether the operating handle, switch and knob are in the correct position, whether the operation is flexible, and whether the safety device is safe and reliable.


3. Turn on the power supply, check whether the grinding wheel is loose, run the empty car at low speed for 2-3 minutes, and observe whether the operation is normal. If there is any abnormality, stop the machine for inspection or report.


4. Check whether the liquid level indication height in the oil level gauge is appropriate. If the oil level is insufficient, add enough lubricating oil according to the regulations.


5. Manual oiling gun is used to add oil to each lubricating point of the machine tool. Pay attention to observe whether there is lubricating oil in each moving part of the machine tool, especially the guide rail surface, so as to maintain good lubrication and smooth oil path.


6. Confirm that the lubrication is smooth and good, and the electrical system and all parts are in normal operation before starting to work.


Vacuum Pump vacuum pump and vacuum furnaces Grinding Machine, Cnc Lathe, Sawing Machine vacuum furnace
vacuum furnace vacuum pump,vacuum furnaces vacuum pump,liquid ring vacuum pump