On 2018-08-08 14:48:54
What are the maintenance and management methods of lubricating oil filter
To ensure the effectiveness of the filter is the key to the use and management of the filter during the production of lubricating oil. Two conditions are required to achieve filtration, including equipment and filtration medium necessary for the separation process, and a certain pressure difference must be maintained on both sides. Therefore, in the process of using lubricating oil filter, it is necessary to regularly change the filter element to ensure its filtering effect. Specifically, the maintenance and management methods of lubricating oil filter include the following aspects.
One, regular cleaning or replacement
The medium of the lubricating oil filter should be cleaned and replaced regularly so as to facilitate the management. The cleaning or replacement period can be determined according to the work load of the station and the working condition of the polluted medium. Considering economy, this management method of lubricating oil filter is more suitable for the situation of little fluctuation change, otherwise it is not suitable, and in the production of lubricating oil, this method is mainly used in the filter cloth, basket filter, self-cleaning filter and other types of products with low consumable price.
Two, quantitative cleaning or replacement
Quantitative cleaning or replacement is also more convenient for the management of the lubricating oil filter. According to the working condition of the polluted medium, the amount of cleaning or replacement can be confirmed. This method is more reasonable than regular replacement. But lube oil filter factory remind filter medium pollution degree is not invariable, when filter medium pollution degree is abnormal, it should be measured separately, so this method of quantitative cleaning is generally only used in the intermediate filter.
Three, constant pressure difference cleaning or replacement
This is a relatively accurate control method, combined with the production pressure and pollution capacity requirements of the filter material of the lubricating oil filter, at the same time, the actual verification in the production line, to determine the pressure difference value for cleaning or replacement. When the set pressure difference value is reached, the pressure difference transmitter will send a signal to alarm. At this time, the staff can timely change the filter element of the lubricating oil filter, which is more accurate than manual identification and can better ensure the effective filtration of the product terminal.
The above are several aspects of the maintenance and management methods of lubricating oil filter. In a word, the whole process of lubricating oil filter is a very comprehensive and systematic work, which needs to be well managed and controlled from the entrance to the exit. And according to the source of impurities to take more corresponding measures, step by step to eliminate it, and install lubricating oil filter is currently more direct and effective control method.