On 2018-08-08 14:48:54
Ultrasonic cleaning machine detailed steps for using
The items to be cleaned are placed in the washing basket of the washing machine, and then the basket is placed in the sink. Items must not be placed indirectly in the sink to avoid damaging the equipment and the effect. Ultrasonic automatic washing machine, may wash the voucher difference of the product, and will pour the ratio into the wash liquid. Water may be in an aqueous solution. The water level shall not be lower than 60mm and the maximum water level shall not exceed 80mm.
Turn over the switch button of the ultrasonic washing machine, the green switch lights up, showing common things. According to the washing request of the project, turn over the temperature of the ultrasonic washing machine to regulate the temperature. When the heater arrives at the request, the heater will stop doing things. If below the set temperature, the heater will inherit effective heating.
When the heating temperature reaches the product wash request, can turn over wash timer, and demand timer demand timer time. Wash the same items for 10 to 20 minutes as usual, and dispose of parts that are difficult to clean. Timer position can be adjusted within 1-20 minutes, also can be adjusted in the normal position. Usually wash for 10-20min, suitable for parts that are difficult to wash. Wash basin and take out wash basket with warm water. Rinse in a warm bath with no solvent. After washing, items should be drilled, stored and assembled.