The filter element of vacuum oil filter is used to keep the hydraulic oil clean in the oil filter. How can the filter element of vacuum oil filter ensure the cleanliness of oil for a long time? The key is to clean the filter element.
1. Before cleaning the vacuum oil filter, it is necessary to stop the operation of the oil filter, close the oil inlet and outlet pipelines, and turn off the power switch.
2. Open the oil valve and drain all the oil in the filter until the oil runs out (open the air valve during oil discharge to speed up oil discharge).
3. Open the filter cover and take out the filter element after putting.
4. Take out the filter element of the vacuum oil filter and put it into an oil pan filled with kerosene. Soak for 30 minutes, then clean it and blow it clean with air.
5. Brush the sediment on the surface of the filter, and then wipe the filter clean with a rag.
On 2018-08-08 11:45:46
