1200 ℃ three zone tubular furnace

1200 ℃ three zone tubular furnace description:


The 1200 ℃ three zone tubular furnace has the advantages of uniform temperature field, low surface temperature, timely heating or cooling, energy saving and so on. It is an ideal muffle furnace for high temperature sintering, atmosphere reduction, CVD experiment and vacuum annealing in industry, scientific research institutions and universities.


It is designed with resistance wire and double shell heating element, phase-shift trigger, thyristor. The temperature controller is programmable. The chamber is made of polycrystalline alumina fibers and is divided into two hemispheres. When you need to cool the furnace immediately or change the furnace tube, you can open the furnace chamber. The two ends of the pipe are connected with stainless steel flange seals. The flange is equipped with gas fittings, valves and pressure gauges, and these fittings are provided. The vacuum degree can be 10-3 PA in vacuum. The furnace is a split type furnace, which is divided into three zones. Each zone can be set at different temperatures, easy to operate and simple.

1200 ℃ three zone tubular furnace.jpg

1200 ℃ three zone tubular furnace advantage:


1. Temperature controller, a variety of temperatures are optional. We can design the controller according to your needs or customize it.


Optional: Shimaden FP93 40 programmable sections (made in Japan), which can be divided into 4,2,1 programs, namely. 4x10 subdivision. FP93 has six PID control, low, medium and high temperature use different PID for precise control.


Over temperature and over-current protection, when the thermocouple is damaged, it will automatically close (when the temperature is higher than 1200C or the thermocouple is damaged, when the "on" on the board is closed and the "off" is turned on, it will turn off the power supply)


There are Fahrenheit (f) and Celsius (c) options.


With 485 communication interface: automatic shutdown.


2. Cover opening protection system: the travel limit switch is installed to protect the user. When the cover is opened, the power will be cut off.


3. Chamber: imported from Japan, it has good heat preservation performance, high reflectivity, uniform temperature field, and strong resistance to thermal expansion and contraction.


4. Heating element: the furnace is equipped with excellent A1 resistance wire to ensure uniform temperature field and long service life.


5. Leakage protection function: air leakage switch is installed in the furnace. When the leakage or current exceeds the rated current, the power will be cut off automatically.


6. Software control system: the furnace can directly control each parameter, and observe PV and SV on the computer through the communication interface and software. The computer can draw and save the actual heating curve, which is convenient to call these dates at any time.


7. Control system:


Power control: Chint;


Controlled silicon: Semikron 106 / 16e, Germany;


Triggering: phase shift triggering


8. Vacuum system: the vacuum degree of German molecular pump can be 10-1 or 10-4. Tw-1.5 vacuum pump is optional.


9. Gas system: floating flowmeter or digital flowmeter (MFC) is an option for controlling gas speed.


10. Flange: with double ring sealing flange, there are many adapters on the flange, which are used to connect digital vacuum gauge and K25 vacuum bellows. It can be made into hinge for easy disassembly.


11. Cover plate: it is safer and more convenient to open the cover plate because of the hydraulic lifter.


Specification:


Power

5.4KW

Tube size

Dia 50(inner diameter 43)X1300 mm

Power

220V, single phase

Heating element

Kanthal resistance wire

Temperature controller

Three PID automatic control with 30 programmable segments for precise control of heating rate, cooling rate and dwell time.
     Built-in overheating & broken thermocouple protection.
     Over temperature protection and alarm allows for operation without attendant(s).
     +/- 1 ºC temperature accuracy.
     Three K-type thermocouples (one for each zone).
     Optional:  
     The furnace may be operated by PC by installing a control module. Please order an control module at extra cost.
     If you order the PC control module together with the furnace, we will install and test it before shipping. We recommend you to order a computer laptop from us to avoid software installation problems.
     Note:we can also design the controller with your need, please contact us for the details.

Chamber material

Polycrystalline alumina fibre

Temperature accuracy

 +/- 1 ℃

Max. temperature

 1200 ℃

Continuous working temperature

 1100 ℃

Heating zone length

200mm+200mm+ 200mm

Thermocouple

K type (3 pieces)

Surface temperature

Less than 45 ℃

Dimension

705X370X515(LXDXH)

Max. Heating rate

 ≤ 30 ℃/Min

Suggestion heating rate

 ≤ 15 ℃/Min

Warranty

1 year  not include the furnace tube, with lifespan support for free.

Standard accessories

1 piece quartz tube, 1 pair tube blocks, 1 pair flange, 1 piece operation hook, 1 pair protective gloves, 1 piece manual, etc




Contact us