Constant Temperature and Humidity Accelerated Weathering Test Instrument
Constant Temperature and Humidity Accelerated Weathering Test Instrument
Technical parameter:
Inside size WxHxD (cm) | 40x50x40 | 50x60x50 | 50x75x60 | 60x85x80 | 80x95x80 | 100x100x80 | 100x100x100 |
Outside size W*H*D (cm) | 90x136x94 | 100x146x104 | 100x161x117 | 110x171x137 | 130x181x137 | 150x186x137 | 150x186x157 |
Temp. range | -70 degree ~ +100(150) degree | ||||||
Humidity range | 20%~98%R.H.(10%-98%R.H / 5%~98%R.H is the specific condition ) | ||||||
Accuracy/ uniformly | ±0.1 degree ±0.1%R.H./ ±1.0 degree ±3.0%R.H. | ||||||
Accuracy / volatility | ±1.0 degree ±2.0%R.H. / ±0.5 degree ±2.0%R.H. | ||||||
Heating / cooling time | About 4.0/min(heat),about 1.0/min(cool) ( 5~10/mm is the specific condition ) | ||||||
Inside material | Stainless steel SUS 304 # | ||||||
Insulation material | High-temperature high-density amino acid ethyl ester foam insulation materials, | ||||||
Cooling system | Air-cooled/ single-stage compressor(-20 degree) , wind, water cooled/two-stage compressor(-40~-70 degree) | ||||||
Protection | compressor overload switch, high and low pressure protection switch, over-humidity-temperature protection switches, fuses, warning system | ||||||
Accessories | recorder(purchase), view window, 50mm testing hole, PL lamp, clapboard, Dry and wet gauze ball | ||||||
Controller | TEMI300 digital controller from South Korea | ||||||
Compressor | France Taikang | ||||||
Power | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz | ||||||
