3000c Graphite Powder Vacuum Graphitization Furnace
3000c Graphite Powder Vacuum Graphitization Furnace Application:
The equipment is mainly used for high temperature heat treatment of carbon materials, carbon nanometers, carbon fibers, anti radiation materials, negative materials, graphite powder, Rh materials, contact terminal materials and other related materials.
3000C graphite powder vacuum graphitization furnace configuration:
1. Furnace door: rotating hinge locking; manual / automatic locking
2. Furnace shell: all carbon steel / stainless steel inner layer / all stainless steel
3. Furnace boiler: soft carbon felt + hard combination felt / full hard combination felt.
4. heater material: hydrostatic graphite / three molded graphite.
5. Muffle material: fine graphite
6. Gas path control: Volume / mass flow calculation, manual / automatic valve, imported / domestic
7. Vacuum pump and vacuum gauge: imported / domestic
8. Skip: roller / forklift
9. Operation panel: analog screen / touch screen / industrial computer
10. PLC: Delta / Omron / Siemens / MITSUBISHI
11. Temperature controller: Electric Island / Mainland
12. Thermocouple: C index ( molybdenum tube / ceramic tube)
13. Recorder paperless recorder / paper recorder, imported / domestic
14. Electrical components: Chint / Schneider / Siemens / ABB
3000C graphite powder vacuum graphitization furnace technical features:
1. Adopt special furnace boiler structure and heater layout, with good furnace temperature uniformity.
2. Special structure of degreasing box is adopted, which has good sealing effect and no pollution.
3. It has flexible vacuum, vacuum sintering, micro positive pressure sintering and other functions.
4. Adopt the most favorable thermal insulation structure and materials, the furnace has good thermal insulation performance and less heat storage, saving more than 25% energy than the traditional design.
5. Touch screen operation, PLC centralized control, simple operation, high reliability.
6. It has over temperature and over pressure fault alarm, mechanical automatic pressure protection, action interlock and other functions, with high safety.
7. It has the functions of remote operation, remote fault diagnosis and remote software upgrade.
3000C graphite powder vacuum graphitization furnace product specification:
Model Parameter | Lab usage | Production usage | ||||
NTI-SML-54W2 | NTI-SML-98W2 | NTI-SML-182W2 | NTI-SML-432W2 | NTI-SML-576W2 | ||
Working size | mm | 300×300×600 | 350×350×800 | 450×450×900 | 520×520×1600 | 600×600×1600 |
Heating type | / | IF induction heating | ||||
Control type | / | Thyristor control or IGBT control ( optional ) | ||||
HT zone capacity | L | 54 | 98 | 182 | 432 | 576 |
Loading weight | g | HT zone capacity × density (g/cm³)×1000 Remark:1L=1000cm³ | ||||
Ultimate vacuum | Pa | 20 | ||||
IF power | Kw | 150 | 200 | 250 | 350 | 500 |
Max. working temperature | ºC | 3000 | 3000 | 3000 | 2900 | 2900 |
Usual working temperature | ºC | 2800 | 2800 | 2800 | 2800 | 2800 |
Temperature uniformity | ºC | ±10 | ±10 | ±10 | ±10 | ±15 |
Working environment | / | Vacuum or Argon atmosphere protection( micro positive pressure) | ||||
