Steel Bar Induction Forging Furnace Description:

The furnace basically includes JL intermediate frequency generator, compensation cover, workbench, heating coil, coil cover, rod feeder, etc. For some applications, it can also include infrared sensor, temperature controller and automatic rod feeding system.

Steel Bar Induction Forging Furnace Characteristics:

1. The frequency range is from 1kHz to 20kHz. The frequency can be designed to meet different sizes of heating rod.

2. In the continuous heating process, the load inside the coil is stable, which overcomes the huge power change caused by the huge load change in the heating process from the cold rod to the 1100 degree rod. The actual power can reach more than 85% of the rated power of the machine.

3. The heating coil is 500mm to 1m long, and several pieces can be heated at the same time to ensure the penetration.

4. Even when heating copper or aluminum and other non-ferrous metals, the actual power can reach more than 85% of the rated power of the machine by properly designing the coil and matching the compensation cover. 3.5kg copper or brass can be heated to 700 degrees per kilowatt in one hour.

Steel Bar Induction Forging Furnace Application:

Forging furnace is used for heating bars and bars larger than Φ 12. The materials can be steel, stainless steel, copper, brass, aluminum, etc. The heating can be the whole rod, the end of the rod or the middle part of the rod.

Steel Bar Induction Forging Furnace Parameters:

Products Recommended

Vacuum Gas Quenching Furnace

Mesh belt type tempering furnace

Austempering annealing carburizing heat treatment continuous mesh belt furnace

1100℃ Tubular Furnace