Square vacuum dryer/vacuum dryer
Square vacuum dryer/vacuum drying box of principle
It is well known that vacuum drying is the process of placing raw materials in a vacuum for heating and drying. If a vacuum is used to dry air and moisture, it will dry faster.
Note: if a condenser is used, the solvent in the raw material can be recovered. The condenser can be replaced by SK series water ring vacuum pump or ZSWJ series hydraulic spray vacuum pump unit.
Square vacuum dryer/vacuum drying box application
It is suitable for dry and easily decomposed thermosensitive materials. Polymerization or degradation at high temperatures, widely used in the pharmaceutical, chemical, food and electronics industries.
Square vacuum dryer/vacuum drying box parameters
parameter/model | YZG-600φ×L |
YZG-1000φ×L
| YZG-1400φ×L | FZG-15L×W×H |
Inner size of syring chamber(mm) | 600×976 | 1000×1527 | 1400×2054 | 1500×1400×1220 |
Outer size of drying chamber(mm) | 1153×810×1020 | 1693×1190×1500 | 2386×1657×1920 | 1513×1924×2060 |
Layers of backing support | 4 | 6 | 8 | 8 |
interval(mm) | 81 | 102 | 102 | 122 |
Size of baking tray(mm) | 310×600×45 | 460×640×45 | 460×640×45 | 460×640×45 |
Quantity of baking tray | 4 | 12 | 32 | 32 |
Working pressure inside the pipe of baking support(MPa) | ≤0.784(8kg/cm2) | ≤0.784 | ≤0.784 | ≤0.784 |
Temperature inside the chamber(°C) | ≤150 | ≤150 | ≤150 | ≤150 |
Degree of vacuum inside the chamber when operation in idle, MPa | ≤30 | |||
Under the vacuum condition of 30and110°C ,evaporation rate of water(kg/m2,h) | 7.2 | |||
Model and power of vacuum pump when condenser is used(kw) | 2X-15A 2kw | W3 5.5kw | W3 7.5kw | 2X-70A 7.5kw |
Model and power of vacuum pump when condenser is not used(kw) | SK-0.8 2.2kw | SK-3 5.5kw | SK-3 7.5kw | SK-3 7.5kw |
Weight of drying chamber(kg) | 250 | 800 | 1000 | 2100 |
