High-Speed Rotating Powder Granule Adhesive Material Dryer Machine

Adaptive materials

Organic matter: at Dejin (pesticide), lauric acid, benzoic acid, benzoic acid, bactericide, sodium oxalate, cellulose acetate, organic pigment.

Dyestuff: antimony, black iron oxide, indigo pigment, butyric acid, titanium hydroxide, zinc sulfide, various intermediate of azo dyestuff.

Inorganic materials: borax, calcium carbonate, hydroxide, copper sulfate, iron oxide, barium carbonate, antimony trioxide, various metal hydroxides, various heavy metal salts, synthetic cryolite, etc.

Food: soybean protein, gelatinized starch, chute, wheat sugar, wheat starch, etc.

Working criteria

Hot air tangents enter the bottom of the dryer and are driven by an agitator to produce a strong rotating wind field. The paste material enters the dryer through a screw feeder. Under the strong action of high-speed rotating propeller, the material is dispersed under the action of impact, friction and shear force. Bulk materials are crushed rapidly and in full contact with hot air and heated to dry. The dehydrated dry material rises with the hot air flow. Large particles shall be reserved for grading and environmental protection. The small particles leave the dryer from the center of the ring and are recovered by the cyclone separator and dust collector. It will not dry or bulk materials will be affected by centrifugal force. Then return to the bottom to be crushed and dried.

High-Speed Rotating Powder Granule Adhesive Material Dryer Machine.jpg

Performance characteristics

The organic combination of swirl, fluidization, jet, crushing and classification technology.

Compact equipment, small volume, high production efficiency, continuous production, and the realization of "small equipment, large-scale production".

High drying intensity, low energy consumption and high thermal efficiency.

It can be used for drying thermosensitive materials.

Negative pressure or micro negative pressure operation, good sealing performance, high efficiency, eliminate environmental pollution.

Technical specification：

Model	XSG-2	XSG-4	XSG-6	XSG-8	XSG-10	XSG-12	XSG-16	XSG-20
Host internal diameter mm	200	400	600	800	1, 000	1200	1600	2000
Air volume M 3 /h	350-500	1150-2000	2450-4500	4450-7550	7000-12500	10000-20000	18000-36000	28200-56500
Evaporation water kg/h	12-17	40-70	80-150	150-250	230-4250	300-600	600-1000	1000-1500
Maximum installed capacity kw	10	20	40	65	85	105	150	230
Maximum height m	4.0	4.8	5.8	6.5	7.1	7.8	8.8	10.1
Land area m 2	15	20	28	35	40	52	80	150

Note: 1. Water evaporation refers to the amount of water evaporated per hour when the inlet air temperature is 180oC and the outlet air temperature is 80oC.

2. In addition to the above models, it can also be specially designed for users.

3. The above installed capacity is standard and can be significantly reduced according to the power of different materials.

Processing materials and characteristics (based on flash type 6)

Material name	Stearic acid	Aluminum hydroxide	Zinc carbonate	Insecticide list	TMTD	DSD acid	Iron oxide red	Strontium dioxide	Cuprous chloride	White carbon black
Inlet air temperature o C	150	180	150	120	140	150	200	180	200	280
Initial moisture content%	80	55	80	30	65	60	60	45	30	85
Final moisture content%	0.5	1.5	1.0	1.0	0.5	0.5	0.5	1.0	3.0	5.0
Actual drying capacity kg/h	140-160	250-280	130-170	80-110	80-120	80-120	300-350	280-320	290-310	250-300

Material name	Accelerator	Oil soluble ink	Manganese zinc oxide	Yan Qinglan	Calcium Citrate	Ultrafine calcium carbonate	Slurry treatment agent	Sodium dioxyisocyanurate	Sodium trioxyisocyanurate
Inlet air temperature oC	150	150	120	150	140	160	200	180	150
Initial moisture content%	60	45	30	55	40	70	75	25	30
Final moisture content%	0.5	2.0	1.0	1.0	1.0	1.5	5.0	0.2-2	1.0
Actual drying capacity kg/h	80-110	350-380	120-150	160-180	300-350	430-470	290-310	80-120	90-150

SHARE