Cooling system of chiller laser cutting machine

Cw-5000 and cw-5200 are refrigerated industrial chillers. It is mainly used to make the heat generated during the operation of the laser equipment pass through the refrigeration cycle of the compressor refrigeration system and eventually transfer to the air.

Cooling system of chiller laser cutting machine

The chiller has two working modes of constant temperature and intelligent temperature regulation, and the temperature control precision can reach ±0.3℃. The chiller is compact in structure, small in size and easy to move.

Cw-5000 is suitable for cooling individual 80W, 100W CO2 laser tubes.

Cw-5200 is suitable for cooling a single 150W CO2 laser tube.


1. 800W refrigerating capacity; Use environmental refrigerants; (the CW - 5000)

1400W refrigerating capacity; Optional ambient refrigerant; (the CW - 5200)

2. Small size, long service life and simple operation;

3. Accurate ±0.3℃ temperature control;

4. The intelligent temperature controller has two control modes, which are suitable for different application occasions; With a variety of Settings and display functions;

5. Various alarm functions: compressor delay protection, compressor overflow protection, water flow alarm and high/low temperature alarm;

6. Various power supply specifications; CE, RoHS and REACH certification;

7. Optional heater and water filter.

Product Parameter

Compressor power /0.295 KW/0.40HP0.52 KW/0.71HP
Refrigerating capacity /2361Btu/h/0.692KW/595Kcal/h5084Btu/h/1.49KW/1281Kcal/h
Refrigerant /R-134aR-22/R-134a/R-410a
Refrigerant charge/300g360g
Protectionflow alarmOver current protection for compressor, flow alarm, over temperature alarm
Pump power/0.03KW0.03KW
Tank capacity9L6L6L
Inlet and outletExternal Φ10mm brass connector
Max. lift10 M
Max. flow10 L/min
N.W9.5 Kg24 Kg26 Kg
G.W12 Kg27 Kg29 Kg
Dimensions49 X 27 X 38 cm (L x W x H)58 X 29 X 47 cm (L x W x H)58 X 29 X 47 cm (L x W x H)
Packing dimensions59 X 39 X 48 cm (L x W x H)70 X 43 X 58 cm (L x W x H)70 X 43 X 58 cm (L x W x H)

Contact us