Laminated Hot Press Machine
Laminating hot press is suitable for furniture factory or panel secondary processing factory. It can laminating furniture panel, building partition, wooden door or laminating various decorative materials on wood-based panel. It can also be used to dry or level the veneer.
Laminated Hot Press Machine Main features:
1. The solid drilling conductive plate is adopted, with fast preheating speed, uniform heat conduction and low energy consumption.
2. The main electrical components of OMRON or Schneider are stable and durable.
3. German haWe valve is used for automatic opening of hydraulic valve, with high pressure maintaining, reliable performance and few human factors.
4. Piston mode of cylinder. Grind, hard chrome surface and polish piston
After heat treatment. Durable and high precision. Special sealing ring is adopted to improve reliability and durability.
5. Polyester film is used for inlet and outlet hose. The external spokes are more flexible and have a long service life and are not easy to be damaged.
6. It is equipped with pull-up emergency stop switch and secondary temperature protection device
Technical parameters:
Model | BY214X8/16(3)H1RC(S) | BY214X9/16(3)H1RC(S) |
Total pressure | 1600kN | 1600kN |
Working layers | 3 | 3 |
Unit surface pressure | 5kgf/cm2 | 4.1kgf/cm2 |
Platen No.& Size | 4-2500x1300x42mm | 4-3000x1300x42mm |
Opening | 120mm | 120mm |
Cylinder No.& Diameter | 10-φ85mm | 10-φ85mm |
Heating way | electric heated with thermal oil | electric heated with thermal oil |
Installed power | 52.75kw | 77.5kw |
Closed speed | 24mm/s | 24mm/s |
