Hot Cold Press Machine

It is suitable for the secondary processing (professional veneer) factory of small-scale wood-based panel or neutral furniture factory, which is used for hot pressing and gluing panel furniture, building partition, door and various wood-based panels, such as plywood, joinery board, MDF, particleboard pressed on the surface of various decorative materials, such as decorative paper, fabric, melamine fireproof board, metal foil, man-made and natural veneer, natural veneer inlaid wood floor; It is not applicable to the single version of the whole dry plane, the leveling and shaping of the color decoration fragments.


The rapid heating system is hot, the heating system, the heat system is designed by careful sections, low energy consumption and heat, uniform heat; the foundation mechanism is reasonable, the processing precision of parts is high, the process parameters are widely adjusted, the process design is reasonably controlled, and can meet the requirements of various single board production processes.


Model: BY814X8/50
Total pressure: 5000KN
Working layer: 1 layer
Working table Size: 2700X1370mm
Opening: 1500mm
Stroke: 1000mm
Main cylinder No. & Dia: 4-φ240mm
Raising cylinder No. & Dia: 2-φ85mm
Installation power: 5.5kw
Loading way: Length side, Manually
Voltage: 3PE 380V 50Hz
Packing: Bare but properly secured
Gross Weight: About 17500.00kg
Container need: 1X40'HQ

Contact us