Bell jar type induction annealing furnace
The product application
The tubular annealing furnace is used for heat treatment of wire after wire drawing machine. Heat will soften the wire.
SPECIFICATIONS OF TUBE TYPE INDUCTION ANNEALING FURNACE | |||
Machine type | CL-40H | CL-60H | CL-24H |
Wire quantity | 40 | 60 | 24 |
wire diameter range | φ0.4mm-0.6mm | φ0.2mm-0.4mm | φ0.05mm-0.4mm |
Max. speed | 50m/min | 70m/min | 180m/min |
furnace length | 6m | 4m | 1.5m |
pay-off type | passive bobbin pay-off | free hair wire pay-off | free hair wire pay-off |
pay-off spool size(bobbin size) | φ300mm-φ500mm | φ250mm-φ300mm | swash plate φ220mm |
furnace tube material | 310S high temperature resistant stainless steel seamless pipe | ||
thermal insulation material | polycrystalline mullite block | ||
temperature control | thyristor power regulator | ||
medium protection | hydrogen | ||
heating power | 135KW | 95KW | 12Kw |
take-up spool size | φ200mm-250mm | φ120mm-200mm | swash plate φ130mm |
traverse type | stepping motor drive adjustable traverse | ||
The main features
1) simple linear structure, easy installation and maintenance.
2) use world-renowned parts in pneumatic parts, electrical parts and operating parts.
3) highly automated and intelligent operation, pollution-free
