DN15 DN25 Mini-flow Pneumatic Diaphragm Control Valve
Valve Specification
| Body type: | straight through casting globe type |
|---|---|
| Spool type: | non-balanced single seat plug type |
| Nominal size: | DN15, 20, 25, NPS 1/2 inch~ 1 inch |
| Nominal pressure: | PN16 ~ 100 CLASS 150LB ~ 600LB |
| Connection: flange: | FF,RF,MF,RTJ |
| Welding: | SW,BW |
| Flange dimension: | acc. to IEC 60534 |
| Bonnet type: | (-45℃~ higher than 230℃ occasion) Low temperature extended type(-196℃~ -45℃) Bellow seal type Warm insulation Jacket type |
| Packing: | V type PFTE packing, flex. graphite packing, etc. |
| Gasket: | Metal graphite packing |
| Actuator: | pneumatic: multi-spring diaphragm actuator, piston type actuator. electric: 3810L series smart actuator, PSL series actuator. |
| Surface painting: | Green color, acrylic acid polyurthene ceramic paint. |
Valve Perfomance
