1. product description of alfalfa hay/hay dryer/drying equipment

This machine is mainly used for alfalfa hay/hay dryer/drying equipment. The leaves and stems of alfalfa reach the same final water content, and alfalfa will not lose its leaves after drying. In this case, it is easy to have two conditions :(A) dried leaves and stems; The total final moisture content of alfalfa exceeds 14%. (2) stem, leaves too dry; The total final water content of alfalfa is less than 14%. Leaves and stems separate. It reduces the quality of alfalfa (the nutrients in its leaves are higher than those in its stems). How to solve this problem? After a lot of experiments, we got the best matching value of each parameter to solve the same problem of leaf and stem drying, such as hot air temperature, hot air speed, material movement speed and so on.

2. Structure of alfalfa hay/hay dryer/drying equipment

The composition of alfalfa belt dryer is to dry the whole alfalfa and distribute it evenly on the conveyor belt through the feeding end. The conveyor net rotates evenly through the motor warp survey system to feed the dried alfalfa into the dryer. Room temperature air enters the hot blast furnace heat exchanger through a fan. Heated by a hot blast furnace, clean hot air enters the dryer. Hot air passes through the layer of alfalfa, and the alfalfa is evaporated by heat in the water. To achieve the purpose of drying. Dry and wet air is discharged from the dryer through an exhaust fan. The whole dried alfalfa meets the requirements of the final water, after cooling by the outlet outlet.

3. Working principle of alfalfa hay/hay dryer/drying equipment

Alfalfa hay/hay dryer/drying equipment USES a hot blast furnace to heat air to form hot air for drying materials. The heat of the double cycle hot air continuously evaporates the water in the material and continuously supplements, which can accurately maintain the set working temperature and replace the water with the oven with high water content in the low water environment to achieve the purpose of drying. The amount of moisture discharged under the automatic humidity control is equal to the amount of material evaporation. Accurately maintain optimum dry humidity (temperature difference between dry and wet). The compressor heats the air through the evaporator, releasing this heat source into the drying chamber. Our machine has a second part waste heat recovery system, which is why our heat pump dryer is more energy efficient than other types of dryer.

4 technical parameters of alfalfa hay/hay dryer/drying equipment

We provide a variety of dryers for various types of products to meet your needs. After you tell me the dry capacity required, we will provide you with good advice.

Products Recommended

Vacuum Gas Quenching Furnace

Mesh belt type tempering furnace

Austempering annealing carburizing heat treatment continuous mesh belt furnace

1100℃ Tubular Furnace