Bench Lathe Machine Tool
Bench Lathe Machine Tool
Features:
Precision ground and hardened be ways.
The spindle is supported with precision roller bearings.
Head stock gears are made of high quality steel ground and hardened.
Easy operating speed change levers.
Removable gap is provided for larger diameter work.
Easy operating gear box has various feeds and thread cutting function.
Two types for selection:with foot stand in reserve or without foot stand.
Swing over bed | 360mm(13") | |
Swing over cross slide | 212mm(8-1/6") | |
Swing in gap diameter | 491mm(9-1/3") | |
Swing in length | 210mm(8-1/4") | |
Center height | 166mm(6-1/2") | |
Admits between | 750mm(30") | 1000mm(40") |
Bed width | 187mm(7-3/8") | |
Bed length | 1363mm(53-2/3") | 1655mm(65-1/8") |
Spindle bore | 38mm(1-1/2") | |
Spindle nose | D1-4" or A2-4" | |
Taper in nose | NO.5 morse | |
Taper in sleeve | NO.3 morse | |
Speeds number | 8 or 16(pole changeable motor) (optional) | |
Speeds range | 70-2000r.p.m.or 35-2000r.p.m. | |
Cross slide travel | 118mm(4-5/16") | |
Compound rest travel | 68mm(2-11/16") | |
Lead screw thread | 8T.P.I. or 3mm pitch | |
Feed rod diameter | 19mm(3/4") | |
Cutting tool max section | 16mm×16mm(5/8"×5/8") | |
Threads imperial pitches | 36 Nos.8-112 T.P.I. or | |
Threads metric pitches | 28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) | |
Threads diametral pitches | 36 Nos.8-112 D.P | |
Threads module pitches | 22 Nos.0.2-3 M.P. | |
Longitudinal feeds imperial | 36 Nos.0.0019-0.0273"/Rev.or | |
Longitudinal feeds metric | 36 Nos.0.050-0.696"/Rev.or | |
Cross feeds imperial | 36 Nos.0.0006-0.0094"/Rev.or | |
Cross feeds metric | 36 Nos.0.013-0.188"/Rev.or | |
Quill diameter | 32mm(1-1/4")(NO.3M.T.) | |
or (optional) | ||
Quill travel | 100mm(3-15/16")(NO.3M.T.) | |
or (optional) | ||
Quill taper | NO.3 morse | |
For main motor | 1.5KW 3PH or 1PH | |
