Smelt scrap steel aluminium casting induction furnace
Aluminum shell
Adopt reducer tilt furnace device. The furnace body is made of alloy aluminum castings Easy to operate maintenance, easy to observe.
Smelt scrap steel aluminium casting induction furnace advantage:
1. Good stability, low cost and small floor area.
2. Simple operation, fast melting speed and low production cost.
3. Simple structure and convenient maintenance.
4. It can be melted directly from the cold furnace, and the solution can be completely drained, so it is easy to change the type of melted material.
5. Low noise, good working environment.
Technical Parameter:
Intermediate frequency induction melting furnace | |||
Name | Unit | Parameter | Remarks |
Rated capacity | ton | 0.5 |
|
Max load capacity | ton | 0.6 | The maximum shipment depends on refractories |
Rated temperature of the melting steel | °C | 1550 |
|
Melting rate | t/h | 0.75-0.9 | Depends on the refractory |
Melting time | Min/furnace | 40±5% |
|
Power consumption | KW.T/H | 550-580 |
|
Rated Power | KW | 100 | Can be customized according to customer requirements |
Input Voltage | V | 380 |
|
DC Voltage | V | 500 |
|
DC Current | A | 150 |
|
IF Voltage | V | 2200 |
|
Working frequency | Hz | 100-1000Hz | The larger the furnace tonnage, the lower the frequency |
